Home » RDBMS Server » Backup & Recovery » RMAN Restore failed (Oracle 11g, RHEL5.9 64bit)
RMAN Restore failed [message #656395] Wed, 05 October 2016 04:27 Go to next message
morad_dba
Messages: 93
Registered: June 2008
Member
Dear all,

I have RMAN zero level backup on November-13-2015 after that we could not take backup as our backup tape media was not functioning, but we took incremental backup on January-12-2016.

For business requirement, we need to restore data up to December-31-2015. But Restore has been failed with errors


Recovery Manager: Release 11.2.0.3.0 - Production on Wed Oct 5 21:47:10 2016

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

RMAN> run{ set until time "to_date('2015-12-31:22:00:00', 'yyyy-mm-dd:hh24:mi:ss')";
2>  restore database; recover database;
3> alter database open resetlogs; }

executing command: SET until clause

Starting restore at 05-OCT-16
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=451 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: Data Protection for Oracle: version 6.3.0.0
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=466 device type=DISK

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/05/2016 01:22:15
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 20 found to restore

I am sharing backup information for you.

Full backup information :

SQL>  select HANDLE, to_char(START_TIME,'dd/mm/rr hh24:mi')sdt, tag, BACKUP_TYPE, INCREMENTAL_LEVEL, BYTES/1024/1024/1024 from rc_backup_piece
  2  where DB_KEY=204378 and trunc(START_TIME)=to_date('13/11/2015','dd/mm/rrrr') order by START_TIME;

HANDLE                                     SDT               TAG                 B INCREMENTAL_LEVEL BYTES/1024/1024/1024
------------------------------------------ ----------------- ------------------- - ----------------- --------------------
data_PBLMIG_20151113_7aqm6o4a_1_1_14570    13/11/15 23:00    TAG20151113T230026  D                 0           141.007324
data_PBLMIG_20151113_7bqm6pqr_1_1_14571    13/11/15 23:29    TAG20151113T230026  D                 0           .011230469
c-1614325108-20151113-00                   13/11/15 23:30    TAG20151113T233017  D                             .011230469
arc_PBLMIG_20151113_7dqm6ptu_1_1           13/11/15 23:31    TAG20151113T233110  L                             .881347656
c-1614325108-20151113-01                   13/11/15 23:31    TAG20151113T233157  D                             .011230469

SQL>



Incremental backup information :

SQL> select HANDLE,bytes/1024/1024 m,to_char(START_TIME,'dd/mm/rr hh24:mi')sdt, tag, BACKUP_TYPE, INCREMENTAL_LEVEL, BYTES/1024/1024/1024 from rc_backup_piece
  2    where DB_KEY=204378 and trunc(START_TIME)=to_date('12/01/2016','dd/mm/rrrr') order by START_TIME;

HANDLE                                              M SDT               TAG                 B INCREMENTAL_LEVEL BYTES/1024/1024/1024
------------------------------------------ ---------- ----------------- ------------------- - ----------------- --------------------
data_PBLMIG_20160112_7iqr6j68_1_1_14578     103154.25 12/01/16 13:57    TAG20160112T135726  I                 1           100.736572
data_PBLMIG_20160112_7jqr6k5n_1_1_14579          11.5 12/01/16 14:14    TAG20160112T135726  I                 1           .011230469
c-1614325108-20160112-00                         11.5 12/01/16 14:15    TAG20160112T141503  D                             .011230469
arc_PBLMIG_20160112_7lqr6k94_1_1            112447.75 12/01/16 14:16    TAG20160112T141558  L                             109.812256
arc_PBLMIG_20160112_7mqr6m5f_1_1            112067.75 12/01/16 14:48    TAG20160112T141558  L                             109.441162
arc_PBLMIG_20160112_7nqr6p5b_1_1             111978.5 12/01/16 15:39    TAG20160112T141558  L                             109.354004
arc_PBLMIG_20160112_7oqr6s3g_1_1            111636.75 12/01/16 16:29    TAG20160112T141558  L                             109.020264
arc_PBLMIG_20160112_7pqr6v3p_1_1             111502.5 12/01/16 17:20    TAG20160112T141558  L                              108.88916
arc_PBLMIG_20160112_7qqr71et_1_1               110789 12/01/16 18:01    TAG20160112T141558  L                             108.192383
arc_PBLMIG_20160112_7rqr73f7_1_1               110745 12/01/16 18:35    TAG20160112T141558  L                             108.149414
arc_PBLMIG_20160112_7sqr75kg_1_1             104257.5 12/01/16 19:12    TAG20160112T141558  L                             101.813965
c-1614325108-20160112-01                         11.5 12/01/16 19:39    TAG20160112T193935  D                             .011230469

12 rows selected.

SQL>


AS RMAN tell that backup of datafile 20 was not found, I checked that Datafile 20 was added to tablespace on 21-November-2015.

SQL> select FILE#, CREATION_TIME from  v$datafile;

     FILE# CREATION_
---------- ---------
         1 30-JUN-05
         2 30-JUN-05
         3 30-JUN-05
         4 30-JUN-05
         5 14-JAN-09
         6 14-JAN-09
         7 14-JAN-09
         8 29-JAN-09
         9 17-AUG-09
        10 02-JAN-10
        11 01-APR-10
        12 31-JUL-10
        13 31-JUL-10
        14 02-JAN-11
        15 09-JAN-11
        16 07-MAR-12
        17 21-JUL-15
        18 05-JUN-13
        19 21-NOV-13
        20 16-NOV-15


We can see that all archive log (near about 800 GB ) have been backed up by RMAN.

We can see backup info of datafile 20

RMAN> list backup of datafile 20 summary;


List of Backups
===============
Key     TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
------- -- -- - ----------- --------------- ------- ------- ---------- ---
2208652 B  1  A SBT_TAPE    12-JAN-16       1       1       NO         TAG20160112T135726
2215058 B  1  A SBT_TAPE    13-JAN-16       1       1       NO         TAG20160113T201522
2216820 B  1  A SBT_TAPE    14-JAN-16       1       1       NO         TAG20160114T230525
2217890 B  0  A SBT_TAPE    15-JAN-16       1       1       NO         TAG20160115T230524
2218814 B  1  A SBT_TAPE    16-JAN-16       1       1       NO         TAG20160116T230524
2219805 B  1  A SBT_TAPE    17-JAN-16       1       1       NO         TAG20160117T230525
2221583 B  1  A SBT_TAPE    18-JAN-16       1       1       NO         TAG20160118T220026
2223005 B  1  A SBT_TAPE    19-JAN-16       1       1       NO         TAG20160119T220026
2224154 B  1  A SBT_TAPE    20-JAN-16       1       1       NO         TAG20160120T220028
2225306 B  1  A SBT_TAPE    21-JAN-16       1       1       NO         TAG20160121T220028
.........

So why RMAN Restoration fails even after all archive log file have been backed up by RMAN and incremental backup was performed.

Please help me in this regard.

Regards,
Morad.










[Updated on: Wed, 05 October 2016 04:50]

Report message to a moderator

Re: RMAN Restore failed [message #656396 is a reply to message #656395] Wed, 05 October 2016 04:33 Go to previous messageGo to next message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
What was your reatore command?
Re: RMAN Restore failed [message #656398 is a reply to message #656396] Wed, 05 October 2016 04:56 Go to previous messageGo to next message
morad_dba
Messages: 93
Registered: June 2008
Member

Restore Command has been added in edited post.

Re: RMAN Restore failed [message #656399 is a reply to message #656398] Wed, 05 October 2016 04:59 Go to previous messageGo to next message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
You would get more help of you provided more information. When you ran that block, were you connected to the recovery catalog?
Re: RMAN Restore failed [message #656402 is a reply to message #656399] Wed, 05 October 2016 05:13 Go to previous messageGo to next message
morad_dba
Messages: 93
Registered: June 2008
Member

We maintain a recovery catalog database. Actually the requirement was to restore every month end data of 2015. As we have RMAN backup, We restored month end data from january to October one after another. We are facing problem as we could not take backup for 47 days. We took zero level backup on 13 nov 2016 and after 47 days we took incremental backup. In the mean time 800 GB archive log had been generated. We did not remove it manually. RMAN took archive log backup and removed it.

The tns are as follows

rmancat =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xxx)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = rmancat)
    )
  )



PBLMIGTEST =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xxx)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = pblmig)
    )
  )





Re: RMAN Restore failed [message #656403 is a reply to message #656402] Wed, 05 October 2016 05:17 Go to previous messageGo to next message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
Connect to the target and the catalog.
Shutdown the target, startup nomount.
Set your until time.
Restore and mount the controlfile.
Restore and recover the database.
Open resetlogs.

And if you want help, show what you are doing and answer questions.
Re: RMAN Restore failed [message #656404 is a reply to message #656403] Wed, 05 October 2016 05:41 Go to previous messageGo to next message
morad_dba
Messages: 93
Registered: June 2008
Member
Actually We have performed these task as

rman target  sys/pblmig@PBLMIGtest catalog rman/rman@rmancat

Recovery Manager: Release 11.2.0.3.0 - Production on Mon Oct 3 17:17:20 2016

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: PBLMIG (DBID=1614325108, not open)
connected to recovery catalog database

RMAN> restore controlfile from 'c-1614325108-20160112-01';

RMAN> alter database mount;

RMAN> run{ set until time "to_date('2015-12-31:22:00:00', 'yyyy-mm-dd:hh24:mi:ss')";
2>  restore database; recover database;
3> alter database open resetlogs; }





Re: RMAN Restore failed [message #656405 is a reply to message #656404] Wed, 05 October 2016 05:47 Go to previous messageGo to next message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
This is hopeless. You might want to consider changing your profession.

I said to set the until time, then restore the controlfie. So what did you do? You restored the controlfile, then you set the until time.
Why did you specify the January backup from which to restore the controlfile? Did I say to do that? No. You have a recovery catalog, you should trust Uncle Oracle to work out what to do. Don't try to be clever when you don't know what you are doing.
Re: RMAN Restore failed [message #656408 is a reply to message #656405] Wed, 05 October 2016 06:50 Go to previous messageGo to next message
morad_dba
Messages: 93
Registered: June 2008
Member

Dear John,

I have performed the task as per your recommendation, but same result....

[oracle@inhousedb u01]$ export ORACLE_SID=pblmig
[oracle@inhousedb u01]$ sqlplus / as sysdba

SQL*Plus: Release 11.2.0.3.0 Production on Wed Oct 5 22:58:59 2016

Copyright (c) 1982, 2011, Oracle.  All rights reserved.

Connected to an idle instance.

SQL> startup nomount
ORACLE instance started.

Total System Global Area 3.1752E+10 bytes
Fixed Size                  2528320 bytes
Variable Size            4575988672 bytes
Database Buffers         2.7137E+10 bytes
Redo Buffers               36237312 bytes
SQL> exit

[oracle@inhousedb u01]$ rman target  sys/pblmig@PBLMIGtest catalog rman/rman@rmancat

Recovery Manager: Release 11.2.0.3.0 - Production on Wed Oct 5 22:59:53 2016

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: PBLMIG (not mounted)
connected to recovery catalog database

RMAN> run{set until time "to_date('2015-12-31:22:00:00', 'yyyy-mm-dd:hh24:mi:ss')"; restore controlfile  from 'c-1614325108-20160112-01';
2>  alter database mount; }

executing command: SET until clause

Starting restore at 05-OCT-16
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=421 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: Data Protection for Oracle: version 6.3.0.0
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=436 device type=DISK

channel ORA_DISK_1: no AUTOBACKUP in 7 days found
channel ORA_SBT_TAPE_1: restoring control file
channel ORA_SBT_TAPE_1: restore complete, elapsed time: 00:00:19
output file name=/u01/oracle/oradata/pblmig/control01.ctl
output file name=/u01/oracle/oradata/pblmig/control02.ctl
output file name=/oracle/pblmig/control03.ctl
output file name=/oracle/pblmig/control04.ctl
Finished restore at 05-OCT-16

database mounted
released channel: ORA_SBT_TAPE_1
released channel: ORA_DISK_1

RMAN>  run{ set until time "to_date('2015-12-31:22:00:00', 'yyyy-mm-dd:hh24:mi:ss')";
2> restore database; recover database;
3>  alter database open resetlogs; }

executing command: SET until clause

Starting restore at 05-OCT-16
using channel ORA_SBT_TAPE_1
using channel ORA_DISK_1

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/05/2016 23:24:59
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 20 found to restore




Re: RMAN Restore failed [message #656410 is a reply to message #656408] Wed, 05 October 2016 06:55 Go to previous messageGo to next message
John Watson
Messages: 8922
Registered: January 2010
Location: Global Village
Senior Member
It look to me as though you are trolling: being deliberately stupid in order to make people angry.
I shall not reply further until you show that you are trying to follow instructions, rather than trying to annoy.

[Updated on: Wed, 05 October 2016 06:56]

Report message to a moderator

Re: RMAN Restore failed [message #656411 is a reply to message #656395] Wed, 05 October 2016 07:05 Go to previous message
EdStevens
Messages: 1376
Registered: September 2013
Senior Member
Also posted to https://community.oracle.com/thread/3978320
Previous Topic: RMAN duplicate with standby as target
Next Topic: Archive log Sequence number not in order
Goto Forum:
  


Current Time: Thu Mar 28 03:31:58 CDT 2024